Posters
| Monday, June 8, 2026 |
| 13:30 - 14:30 |
| Second Foyer |
Speaker
Dr. Jia Yan Law
University of Seville
PB-3: NEW LOW CRITICALITY HIGH ENTROPY ALLOYS WITH IMPROVED MAGNETOCALORIC EFFECT AT ROOM TEMPERATURE
Dr. Matteo Molteni
Politecnico Di Milano
PB-4: EXPERIMENTAL INVESTIGATION AND COMPARISON WITH THEORETICAL RESULTS OF A CU BASED QUATERNARY HEUSLER ALLOY
Mr. Marc Ubach I Cervera
Instituto De Nanociencia Y Materiales De Aragón (inma), Csic & Universidad De Zaragoza
PB-5: A SPIN FRUSTRATED HOURGLASS {Gd9} MOLECULAR NANOMAGNET WITH UNUSUAL MAGNETOCALORIC PROPERTIES
Mr. Lukas Beyer
Leibniz IFW Dresden
PB-6: AN EFFICIENT APPROACH TO FABRICATE SPHERICAL MAGNETOCALORIC POWDERS
Ms. Mariana Ríos Naranjo
Basque Center For Materials, Applications, And Nanostructures - Bcmaterials / Basque Country University
PB-8: EXPLORING ANISOTROPIC MAGNETOCALORIC PERFORMANCE VIA FE/TI SUBSTITUTION IN NI–CO–MN–TI HEUSLER-TYPE MELT-SPUN RIBBONS
Dr. Wei Liu
TU Darmstadt
PB-9: FROM HYDROGEN TO HYDROGEN: TUNING THE PERFORMANCE OF GdFeSi FOR MAGNETOCALORIC HYDROGEN LIQUEFACTION THROUGH HYDROGEN MODIFICATIONS
Dr. Benedikt Beckmann
Technical University of Darmstadt
PB-10: SYSTEMATIC STUDY OF THE MICROSTRUCTURE AND MAGNETOCALORIC PROPERTIES IN OPTIMIZED LAFE12B6
Dr. Konstantin Skokov
Technische Universitaet Darmstadt
PB-11: RESIDUAL FERROMAGNETIC REGIONS AFFECTING THE FIRST-ORDER PHASE TRANSITION IN FE-RH
Ms. Eleonora Rusconi
IMEM-CNR
PB-12: IN-OPERANDO COMPARISON OF TAILORED FULL-HEUSLERS WITH FIRST- AND SECOND- ORDER TRANSITIONS FOR LOW-GRADE WASTE HEAT HARVESTING
Dr. Benedikt Beckmann
Technical University of Darmstadt
PB-13: COMPOSITION INFLUENCE AND MAXIMUM MAGNETOCALORIC EFFECT AT ROOM TEMPERATURE IN NI-CO-MN-TI ALL-D HEUSLER ALLOYS
Dr. Franziska Scheibel
Technical University of Darmstadt
PB-14: CORRELATION OF MICROSTRUCTURE, POROSITY AND DEFECTS WITH 1ST-ORDER MAGNETOSTRUCTURAL TRANSITION CHARACTERISTICS IN NI–MN–SN HEUSLER ALLOY
Dr. Catalina Salazar-Mejia
Dresden High Magnetic Field Laboratory (HLD-EMFL), Helmholtz-Zentrum Dresden-Rossendorf
PB-15: ON THE HIGH-FIELD CHARACTERIZATION OF MAGNETOCALORIC MATERIALS USING PULSED MAGNETIC FIELDS
Dr. Radel Gimaev
University Of Ljubljana, Faculty Of Mechanical Engineering
PB-16: GIANT MAGNETOCALORIC EFFECT IN QUATERNARY FE–RH–IR–PD ALLOYS: EXPERIMENTAL AND THEORETICAL STUDY
Mr. Timo Niehoff
Helmholtz-Zentrum Dresden-Rossendorf
PB-17: LIGHT-RARE-EARTH-BASED MAGNETOCALORIC COMPOUNDS: ADDRESSING CRITICALITY
Mr. Diego Daniel De Amorim Camilo Reif
Federal University Of Santa Catarina
PB-19: INFLUENCE OF THE MAGNETIC STATE IN THE THERMO-STRUCTURAL PROPERTIES OF COMMERCIALLY AVAILABLE La(Fe,Si,Mn)13Hz MICROPARTICLES APPLIED IN MAGNETIC REFRIGERATION PROTOTYPES
Mr. Diego Daniel De Amorim Camilo Reif
Federal University Of Santa Catarina
PB-20: YEAR-LONG AGING OF La(Fe,Si,Mn)13Hz MICROPARTICLES USING DIFFERENT FLUIDS CONTAINING CORROSION INHIBITORS FOR MORE RELIABLE MAGNETIC REFRIGERATION SYSTEMS
Dr. Sachin Gupta
Bennett University
PB-21: MAGNETIC AND MAGNETOCALORIC PROPERTIES OF GdRhIn INTERMETALLIC
Mr. Øyvind Brønstad Rørbakken
Delft University Of Technology
PB-22: INTRAGRANULAR STRAIN SCANNING 3DXRD EXPERIMENTS ON THE FERROMAGNETIC PHASE TRANSITION IN (Mn,Fe)2(P,Si) MAGNETOCALORIC COMPOUNDS
Mr. Zhonghao Chang
Universidad De Sevilla
PB-23: NUMERICAL STUDY ON THE FREQUENCY DEPENDENCE OF THE DIRECT MAGNETOCALORIC EFFECT OF GADOLINIUM FILM
Ms. Savvina Maria Papaioannou
BAM
PB-25: XCT IMAGE ANALYSIS FOR CHARACTERIZING 3D PRINTED THERMOMAGNETIC HEAT EXCHANGERS IN ENERGY HARVESTING APPLICATIONS
Mr. Shibl Gill
Danube University Krems
PB-26: MICROMECHANICAL MODELING OF THE MARTENSITE TRANSFORMATION IN NIMNGA ALLOYS
Ms. Suye Bu
Tu Delft
PB-27: FUNCTIONALLY GRADED (Mn,Fe)2(P,Si) THERMOMAGNETIC MATERIALS FOR ENERGY HARVESTING APPLICATIONS
Dr. Gonçalo Oliveira
Universidade Do Porto - FCUP/IFIMUP
PB-29: EXPLORING THE CRITICAL PARAMETERS OF THE SHAPE ANISOTROPY BASED ROTATING MAGNETOCALORIC EFFECT IN Gd
Prof. Vladimir Sokolovskiy
Chelyabinsk State University
PB-30: ATOMIC-SCALE MODELING OF THE COUPLED MAGNETOSTRUCTURAL TRANSITION AND ITS IMPACT ON THE MAGNETOCALORIC EFFECT IN NI-CO-MN-TI HEUSLER ALLOYS
Dr. Anita Yadav
University of Duisburg-Essen
PB-31: FIRST PRINCIPLES INVESTIGATION OF ELEMENTAL SUBSTITUTIONS AND H-LOADING IN LA(FEXSI1-X)13 – BASED MAGNETOCALORIC MATERIALS.
Mr. Kamyar Dobakhti
University Of Ljubljana Faculty Of Mechanical Engineering
PB-32: VALIDATION OF THE NUMERICAL SIMULATION OF A HIGH-FREQUENCY REGENERATIVE THERMOMAGNETIC GENERATOR HYPEREG
Dr. Guilherme Fidelis Peixer
Polo - UFSC
PB-33: ASSESSMENT OF THE THERMODYNAMIC PERFORMANCE EVOLUTION OF A MAGNETIC AIR CONDITIONER PROTOTYPE
Dr. Radel Gimaev
University Of Ljubljana, Faculty Of Mechanical Engineering
PB-35: NUMERICAL MODELING OF AN ACTIVE MAGNETIC REGENERATOR BASED ON THE ROTATIONAL MAGNETOCALORIC EFFECT
Mr. Lamesgin Getnet
University Of Twente
PB-36: THERMOHYDRAULIC STUDY OF GALLIUM-BASED LIQUID METAL IN PASSIVE REGENERATORS FOR MAGNETOCALORIC REFRIGERATION
Mr. Aske Nilsson
Technical University Of Denmark (DTU)
PB-37: COUPLED MAGNETIC AND ELECTRIC MODEL OF A THERMOMAGNETIC ENERGY HARVESTER
Mr. Maxim Wischnewski
Karlsruhe Institute Of Technology
PB-39: A MINIATURE SCALE MULTI-UNIT GENERATOR FOR LOW-GRADE WASTE HEAT RECOVERY
Ms. Clara Estillac Leal Silva
Helmholtz-Zentrum Dresden-Rossendorf
PB-40: DESING AND PERFORMANCE RESULTS OF A NOVEL ROTARY THERMOMAGNETIC MOTOR WITH A FIN ROTOR FOR ENERGY HARVESTING
Mr. Ali Izadi
Helmholtz-zentrum Dresden-rossendorf (HZDR)
PB-41: OPTIMIZED FLUID AND HEAT MANAGEMENT FOR INCREASING EFFICIENCY AND FREQUENCY OF THERMOMAGNETIC GENERATORS
Dr. Lorenzo Gallo
IMEM - CNR
PB-42: FROM WASTE HEAT TO ENERGY HARVESTING: ADVANCING CURIE WHEEL PERFORMANCE THROUGH ROTOR DESIGN
Dr. Luis David Misale
University Of Genoa
PB-44: PERFORMANCE ANALYSIS OF MAGNETIC REFRIGERATION SYSTEMS USING NANOFLUIDS
Mr. Matija Kalin
University Of Ljubljana, Faculty Of Mechanical Engineering
PB-46: A GENERALIZED MODELLING APPROACH FOR ACTIVE ELECTROCALORIC REGENERATORS
Mr. Pravinth Balthazar
School of Mechanical and Mechatronics Engineering, University of Technology Sydney
PB-48: NUMERICAL OPTIMISATION OF IRREVERSIBLE BRAYTON BAROCALORIC REFIRGERATION CYCLE USING (C10H21NH3)2MnCl4
Mr. Adam Plantarič
Fakulteta Za Strojništvo, Univerza V Ljubljani
PB-49: SHELL-BASED FINITE ELEMENT MODELLING FOR OPTIMIZATION OF BUCKLING STABILITY OF SUPERELASTIC SMA STRUCTURES
Ms. Rawan Barakat
Saarland University
PB-50: UNIVERSAL ELASTOCALORIC TEST ENVIRONMENT: DESIGN CONSIDERATIONS AND CHALLENGES
Dr. Luca Cirillo
Università degli Studi di Napoli "Federico II"
PB-51: PERFORMANCE-DRIVEN DESIGN OF AN ELASTOCALORIC REGENERATOR: A NUMERICAL INVESTIGATION
Dr. Luca Cirillo
Università degli Studi di Napoli "Federico II"
PB-52: MULTI-OBJECTIVE OPTIMIZATION FOR THE DEVELOPMENT OF AN ELASTOCALORIC COOLING DEVICE
Mr. Philipp Molitor
Saarland University
PB-53: SMARTCOOL – DEVELOPMENT AND VALIDATION OF A TRANSLATORY ELASTOCALORIC SYSTEM
Mr. Emmanouil Charkiolakis
INMA,CSIC,UniZar
PB-55: A CUSTOM HIGH-PRESSURE CALORIMETER TO EVALUATE THE BAROCALORIC EFFECT
Dr. Alexander Kamantsev
Kotelnikov IRE RAS
PB-58: ELASTOCALORIC EFFECT IN MELT SPUN RIBBONS OF NI-TI-BASED ALLOYS IN AMORPHOUS AND POLYCRYSTALLINE STATES
Prof. Süheyla YÜCE
Ondokuz Mayıs University
PB-59: BAROCALORIC EFFECT IN FE(4ATZ)BF4 SPIN CROSSOVER COMPLEX
Mr. Tim Grupp
Saarland University, Department of Systems Engineering
PB-60: FATIGUE CRACK GROWTH MODELING OF ELASTOCALORIC MATERIALS
Ms. Sara Lafuerza
Instituto De Nanociencia Y Materiales De Aragón, CSIC-Universidad De Zaragoza
PB-62: INVESTIGATION OF MULTICALORIC EFFECTS IN FERROELECTRICS UNDER UNIAXIAL COMPRESSIVE STRESS
Mr. Lovro Cigić
University Of Ljubljana, Faculty Of Natural Sciences And Engineering
PB-63: TUNING TRANSFORMATION TEMPERATURES IN CU–AL–MN SHAPE-MEMORY ALLOYS THROUGH SN ADDITION FOR ELASTOCALORIC COOLING
Aya Benjira
GREMAN UMR
PB-64: ADVANCING BAROCALORIC REFRIGERATION THROUGH ENHANCED THERMAL AND MECHANICAL PERFORMANCE OF SPIN CROSSOVER MATERIALS
Mr. Jiyuan Hu
The Hong Kong University Of Science And Technology
PB-65: AN ENERGY-EFFICIENT ACTUATOR BASED ON WORK RECOVERY IN ELASTOCALORIC COOLING
Mr. Changfeng Su
HKUST
PB-66: STAMPING & STACKING: AN EFFICIENT APPROACH TO MANUFACTURE REFRIGERANT FOR COMPRESSIVE ELASTOCALORIC COOLING
Mr. Yang Li
The Hong Kong University Of Science And Technology
PB-67: A RELIABLE ELASTOCALORIC REGENERATOR BASED ON FATIGUE-RESISTANT SHAPE MEMORY ALLOY
Mr. Marc Aceituno
Institute Of Microelectronics Of Barcelona (imb-cnm, Csic)
PB-68: FLEXIBLE DESIGN AND MICROFABRICATION OF A SI-BASED μTEG PLATFORM FOR HETEROGENEOUS THERMOELECTRIC MATERIAL INTEGRATION
